Abro Epoxy Steel 4 Min Kwik 57g — Authorized Abro Distributor, Kenya

Abro Epoxy Steel 4 Min Kwik is a fast-curing, steel-filled, two-part epoxy adhesive formulated for bonding, filling, and repairing steel, iron, aluminium, brass, copper, and most other metals — and for filling cracks, holes, voids, and surface imperfections in metal castings, fabrications, and machinery components. Available now at Startcore Ventures, your authorized Abro adhesives and repair products distributor on Ngara Road, Nairobi — KES 715 inclusive of VAT for the 57g dual-syringe, in stock, with full manufacturer traceability and Kenya-wide delivery. The 4-minute working time makes it the workhorse fast-cure steel epoxy for automotive workshops, plant maintenance, M&E contractors, plumbers, fabricators, and DIY repair work across Kenya.

Abro Epoxy Steel Price in Kenya and Pack Sizes

Abro Epoxy Steel 4 Min Kwik price in Kenya: KES 715 inclusive of VAT for the 57g dual-syringe. Firm quote, no hidden costs, no "call for price" games.

Pack configuration:

• 57g dual-syringe with static mixing nozzle (replaceable) — part A (epoxy resin) and part B (hardener) pre-measured
• 12 syringes per outer carton
• Replacement static mixing nozzles available on special order — call for pricing
• Larger 114g and 250g sizes of Abro steel epoxy available on special order — call for pricing
• Abro 5-Min, 5-Min Kwik, and 30-Min cure variants available on special order — call for pricing

Product identification:

• Manufacturer: Abro Industries, Inc. (USA — distributed globally)
• Product line: Abro Steel-Filled Epoxy Adhesives
• Grade: Epoxy Steel 4 Min Kwik (fast-cure, steel-filled)
• Chemistry:** Two-part epoxy (bisphenol-A epoxy resin + polyamine hardener), steel-filled
• Colour:** Dark grey (cured) — steel-filler colour matches most ferrous and non-ferrous metals
• Cure system:** Room-temperature cure (no heat required); full mechanical strength at 24 hours

Abro epoxy Kenya pricing at Startcore is competitive against parallel imports, and every syringe is sourced direct from Abro's authorized East African distribution channel. If a quote comes in far below ours, the product is almost certainly expired stock being resold as fresh, parallel-imported grey-market product without traceability, or counterfeit refilled syringes from unbranded epoxy. Abro Epoxy Steel has a defined shelf life and a batch-traceable certificate — we provide both on request.

Abro Epoxy Steel 4 Min Kwik Specifications

Abro Epoxy Steel 4 Min Kwik technical data — typical values, manufacturer-rated, from the Abro Technical Data Sheet (TDS):

• Chemistry: Two-part epoxy (bisphenol-A epoxy resin + polyamine hardener), steel-filled
• Colour (mixed, cured): Dark grey
• Density (mixed): Approximately 1.50 – 1.80 g/cm³ (steel-filled — denser than unfilled epoxy)
• Mix ratio: 1:1 by volume (pre-measured in dual-syringe)
• Working time (pot life): 4 minutes at 23°C (the "Kwik" designation — fast-cure grade)
• Fixture time: 8 – 12 minutes at 23°C (parts can be handled)
• Functional cure: 1 – 2 hours at 23°C (parts can be put into light service)
• Full cure: 24 hours at 23°C (full mechanical strength, chemical resistance, and temperature resistance)
• Tensile shear strength (steel-to-steel, ASTM D1002): Approximately 17 – 20 MPa (2,500 – 2,900 psi)
• Compressive strength: Approximately 55 – 70 MPa (8,000 – 10,000 psi)
• Hardness (Shore D, cured): Approximately 80 – 85
• Service temperature range (cured): -40°C to +120°C continuous; +150°C short-term peak
• Electrical conductivity: Conductive (steel-filled — can be used to bridge electrical continuity in some applications; confirm for specific requirements)
• Chemical resistance (cured): Resistant to petrol, diesel, motor oil, hydraulic fluid, mild acids, mild alkalis, and most solvents (confirm for harsh chemicals)
• Water resistance: Excellent once fully cured
• Sandable and machinable: Yes — once fully cured, can be sanded, filed, drilled, tapped, and machined
• Paintable: Yes — once fully cured, can be painted with most paint systems
• Substrate compatibility: Steel, stainless steel, aluminium, brass, copper, bronze, galvanised steel, cast iron, ceramic, concrete, wood, fibreglass, and most rigid plastics (confirm on TDS for specific plastic substrates)
• Container: 57g dual-syringe with replaceable static mixing nozzle
• Shelf life: 24 months from date of manufacture in unopened original syringe
• Storage: Store at +5°C to +30°C in original container, away from direct sunlight

Abro Epoxy Steel 4 Min Kwik specifications make it the right fast-cure steel-filled epoxy for emergency repairs, production-line fixes, and any application where a steel-matched, machinable, paintable repair is needed within minutes. For longer working time (more complex assemblies, large surface area bonding), step up to the Abro 5-Min, 30-Min, or 60-Min cure variants — call to discuss.

What the Abro Epoxy Steel 4 Min Kwik Is Built For

The Abro Epoxy Steel 4 Min Kwik is the workhorse fast-cure steel epoxy. Use it for:

Automotive and transport repairs:

• Repairing cracked or broken steel and aluminium engine brackets, water-pump housings, alternator brackets, and mounting points.
• Filling stripped thread holes in engine blocks, gearbox housings, and differential cases (then re-tap).
• Repairing corroded or damaged battery trays, fuel-tank mounting brackets, and chassis components.
• Bonding metal to metal where welding is impractical (thin gauge, dissimilar metals, no welding equipment available).
• Sealing small leaks in metal fuel tanks, radiators, and oil pans (as an emergency or temporary repair).

Plant maintenance and industrial repairs:

• Repairing cracked cast-iron pump housings, valve bodies, and gearbox cases.
• Filling worn shaft bearing seats and keyway damage (build up with epoxy, machine back to size).
• Repairing damaged hydraulic cylinder bores and rod ends (as an emergency repair).
• Bonding metal wear plates, guide rails, and chute liners.
• Filling cracks and porosity in castings.

M&E, plumbing, and building services:

• Repairing cracked or leaking cast-iron waste pipes and soil stacks (as an emergency or permanent repair).
• Repairing damaged copper and steel water pipework (as an emergency repair — full replacement is preferred for permanent repairs).
• Bonding metal brackets, supports, and hangers to concrete, masonry, and steel.
• Sealing around conduit penetrations and metal service entries.

Metal fabrication and workshop:

• Filling weld porosity and pinholes in fabricated steel and aluminium assemblies.
• Building up worn or machined surfaces (then re-machine to spec).
• Filling and finishing surface imperfections before painting or powder coating.
• Bonding dissimilar metals in fabricated assemblies.

DIY and general repair:

• Repairing broken metal tools, hinges, brackets, and fittings.
• Filling stripped screw holes in metal (then re-tap or use a larger screw).
• Repairing cracked or broken metal furniture, gates, and grilles.
• Filling cracks in cast-iron cookware, decorative metalwork, and garden fittings.

NOT recommended for:

• Flexible or elastomeric substrates (rubber, soft plastics, leather — epoxy is rigid and will crack on flexing substrates; use a flexible adhesive or polyurethane instead).
• Structural load-bearing joints in critical applications (welded or mechanically fastened joints are preferred for structural load-bearing applications — epoxy is for repair, bonding, and filling, not for primary structural joints).
• Wet or continuously submerged service (epoxy is water-resistant once cured but is not rated for continuous underwater immersion unless specifically formulated for it; for submerged service, use an underwater-rated epoxy or polyurethane).
• High-temperature continuous service above 120°C (for continuous high-temperature service, use a high-temperature-rated epoxy or a ceramic-filled repair compound).
• Food-contact applications (use a specific NSF H1 food-grade epoxy — call to discuss).
• Polyethylene, polypropylene, or PTFE substrates (epoxy does not adhere to these without specific surface treatment or priming — call to discuss).

Genuine Abro Epoxy vs Counterfeit: What to Check

Counterfeit and expired epoxy adhesives are common in the Kenyan automotive and hardware supply market. A syringe of fake or expired epoxy will not cure properly, will not reach rated strength, and will fail in service. Before you buy Abro Epoxy Steel in Kenya, verify the following:

1. Abro batch number and date code printed on every syringe. The format is a multi-character batch code with manufacture date. No batch code or no expiry = reject the syringe.
2. Certificate of Analysis (CoA) available on request for the specific batch — confirms mix ratio, viscosity, and Shore D hardness.
3. Syringe and label quality — genuine Abro dual-syringes are high-quality HDPE with a clean, crisp Abro label including the Abro Industries branding, hazard pictograms (epoxy resin and polyamine hardener are both skin sensitisers), and product code. Counterfeits have fuzzy, off-colour, or mis-spelled labels, and the syringe is often a generic no-name dual-syringe with an Abro label stuck on.
4. Static mixing nozzle — genuine Abro syringes ship with a replaceable static mixing nozzle that ensures correct mix ratio. Counterfeit syringes may have no nozzle, a generic nozzle, or a poorly-fitting nozzle that allows incorrect mixing.
5. Cure test — dispense a small bead onto a piece of scrap metal, allow 10 minutes, then check hardness. Genuine Abro Epoxy Steel 4 Min Kwik will set hard within 8 – 12 minutes and reach full hardness within 24 hours. Counterfeit or expired product may remain soft, tacky, or fail to set at all.
6. Strength test — bond two pieces of scrap steel together with the epoxy, allow 24 hours to cure, then try to separate them. Genuine Abro Epoxy Steel will exceed the strength of the substrate — the steel will fail before the bond. Counterfeit product will fail at the bond line with minimal force.
7. Distributor supply — only an authorized Abro distributor like Startcore can issue a tax invoice tied to the manufacturer batch records. If your seller cannot produce a CoA or trace the batch, walk away.

Startcore supplies every syringe of original Abro Epoxy Steel Nairobi with a tax invoice, the manufacturer's batch code, and a CoA on request. We rotate stock by FIFO (first in, first out) to ensure the longest remaining shelf life ships first. Epoxy adhesives are sensitive to temperature and storage conditions — keep unopened syringes cool and dry, and use opened syringes promptly (the pre-measured dual-syringe is single-use once the cap is removed and the static mixer fitted).

Why Buy Abro Epoxy Steel from Startcore Nairobi

Startcore Ventures supplies Abro adhesives, repair compounds, and maintenance products to automotive workshops, plant maintenance teams, M&E contractors, plumbers, fabricators, and hardware retailers across Kenya from our Ngara Road, Nairobi store. We are an authorized Abro distribution partner, with direct access to full product traceability, technical data sheets, and a wide Abro range in stock.

What you get when you buy Abro Epoxy Steel 4 Min Kwik from us:

• Genuine, distributor-sourced stock — every syringe traceable to an Abro batch code.
• Certificate of Analysis on request for the specific batch you're buying.
• Tax invoice for business accounts and tender submissions.
• Trade pricing for high-volume users — call us to set up an account and discuss monthly contracts.
• Full Abro adhesive range in stock — Epoxy Steel 4 Min Kwik, 5 Min, 30 Min, 60 Min, Clear Epoxy, Plastic Epoxy, and the full Abro repair and maintenance range.
• Replacement static mixing nozzles in stock — for the dual-syringe format.
• Surface preparation products in stock — Abro Surface Cleaner, degreasers, and abrasive pads for proper substrate preparation before bonding.
• Kenya-wide delivery from our Ngara Road store — same-day in Nairobi, next-day to Mombasa, Kisumu, Eldoret, Nakuru, Thika, and all major towns. Cash on delivery available for verified trade accounts.
• Abro technical support — call us with your substrate, repair type, working time required, and service conditions, and we'll confirm Abro Epoxy Steel 4 Min Kwik is the right grade or recommend an alternative.

We also stock the related adhesives and repair products range — Loctite threadlockers and retainers, Akfix sealants, Molyslip anti-seize, CRC products, Würth fillers and putties, and the full repair and maintenance consumables range — so you can source your full workshop and maintenance requirement from one supplier.

Abro Epoxy Steel 4 Min Kwik — Frequently Asked Questions

What is the Abro Epoxy Steel 4 Min Kwik price in Kenya? KES 715 inclusive of VAT for the 57g dual-syringe at Startcore Ventures, Nairobi. Trade pricing available for high-volume users and monthly contracts. Carton (12-syringe) pricing on application. Larger 114g and 250g sizes available on special order. Call 0705544817 for a quote.

Is the Abro Epoxy Steel 4 Min Kwik available in Nairobi right now? Yes. The 57g dual-syringe is in stock at our Ngara Road store. You can collect same-day, or we can arrange Kenya-wide delivery. For bulk orders (carton quantities), call ahead on 0705544817 so we can confirm quantity and reserve stock.

What is the working time of Abro Epoxy Steel 4 Min Kwik? The working time (pot life) is 4 minutes at 23°C. This means you have approximately 4 minutes from dispensing to position and clamp the parts before the epoxy begins to set. Fixture time is 8 – 12 minutes (parts can be handled). Functional cure is 1 – 2 hours (parts can be put into light service). Full cure is 24 hours (full mechanical strength). For longer working time on complex assemblies or large surface areas, step up to the Abro 5-Min, 30-Min, or 60-Min cure variants — call to discuss.

How strong is Abro Epoxy Steel? Abro Epoxy Steel 4 Min Kwik has a tensile shear strength of approximately 17 – 20 MPa (2,500 – 2,900 psi) on steel-to-steel bonds. In practical terms, the bond is stronger than the substrate — the steel will fail before the bond does. Compressive strength is approximately 55 – 70 MPa (8,000 – 10,000 psi). Hardness is approximately Shore D 80 – 85, which allows the cured epoxy to be sanded, filed, drilled, tapped, and machined.

Can Abro Epoxy Steel be sanded and painted? Yes. Once fully cured (24 hours), Abro Epoxy Steel can be sanded, filed, drilled, tapped, machined, and painted with most paint systems. The steel-filled epoxy takes primer and paint well; for best results, lightly abrade the cured surface and prime before applying the topcoat.

Can Abro Epoxy Steel be used on aluminium? Yes. Abro Epoxy Steel bonds well to aluminium, brass, copper, bronze, stainless steel, galvanised steel, cast iron, and most other metals. For best adhesion on aluminium, lightly abrade the surface with sandpaper or a wire brush, then degrease with isopropanol or Abro Surface Cleaner before applying the epoxy.

Can Abro Epoxy Steel be used to fill stripped screw holes? Yes — this is one of the classic Abro Epoxy Steel applications. Fill the stripped hole with epoxy, allow 24 hours to fully cure, then re-drill and tap to the original thread size. The steel-filled epoxy provides a strong, durable thread base.

Can Abro Epoxy Steel be used on plastic? Abro Epoxy Steel bonds to most rigid plastics — fibreglass, rigid PVC, acrylic, polycarbonate, ABS, and most engineering plastics. It does NOT bond well to polyethylene (PE), polypropylene (PP), PTFE (Teflon), or silicone rubber — these require specific surface treatment or a different adhesive. For plastic-specific repairs, Abro also stocks a Plastic Epoxy variant — call to discuss.

What temperature can Abro Epoxy Steel handle? Abro Epoxy Steel 4 Min Kwik has a service temperature range of -40°C to +120°C continuous, with short-term peaks to +150°C. For continuous high-temperature service above 120°C, use a high-temperature-rated epoxy or a ceramic-filled repair compound — call to discuss.

What is the shelf life of Abro Epoxy Steel? 24 months from the date of manufacture in unopened original syringe, stored at +5°C to +30°C and protected from direct sunlight. The batch code and date are printed on every syringe. We rotate stock by FIFO and ship the longest remaining shelf life first. Once a syringe cap is removed and the static mixer is fitted, the contents must be used within the working time — the dual-syringe is single-use. To preserve an opened syringe for short-term use (hours), fit a replacement cap (not the static mixer) to seal the nozzle.

Do you deliver Abro Epoxy Steel outside Nairobi? Yes. We deliver Kenya-wide. Same-day in Nairobi, next-day to Mombasa, Kisumu, Eldoret, Nakuru, and all major towns. Delivery cost depends on location and order size. Cash on delivery available for verified trade accounts. Call 0705544817 for a delivery quote.

Order Abro Epoxy Steel 4 Min Kwik from Startcore Today

Abro Epoxy Steel 4 Min Kwik 57g dual-syringes are in stock at our Ngara Road, Nairobi store at KES 715 inclusive of VAT per syringe. Visit us in person, call 0705544817, or send a WhatsApp to 0705544817 for bulk pricing. We deliver countrywide.

Startcore Ventures Limited Authorized Abro Distributor — Adhesives & Repair Products Bhavesh Centre, Ngara Road, Nairobi 0705544817 info@startcore.co.ke www.startcore.co.ke