IN STOCK
Mapei
Adesilex PG2 – Two-Component Epoxy Adhesive for Structural Bonding
Mapei Adesilex PG2 – Two-Component Epoxy Adhesive for Structural Bonding | Nairobi, Kenya
Price: KES 9,000 (Inclusive of VAT) Brand: Mapei (Italy) | Authorized Startcore Ventures Distribution Category: Construction Chemicals / Structural Adhesives & Epoxy Bonding Pack Size: 6kg Kit (4.5kg Component A + 1.5kg Component B) | Availability: In Stock
Product Overview
If you're searching for a genuine, high-strength structural epoxy adhesive in Kenya, Mapei Adesilex PG2 is the product engineers, structural repair contractors, and reinforcement specialists specify when a bond simply cannot be allowed to fail. This is not a general-purpose construction adhesive — it's a two-component, thixotropic epoxy system engineered in Mapei's own research laboratories specifically for structural bonding applications where mechanical strength, durability, and long-term reliability are non-negotiable.
Adesilex PG2 is formulated from selected epoxy resins combined with fine-grain aggregates and specialized additives. When Component A (resin) is mixed with Component B (hardener) in the correct ratio, the result is a smooth, thixotropic paste — meaning it stays exactly where you put it, even on vertical or overhead surfaces, without slumping or dripping, and without the need for formwork or shuttering. Once applied, it cures through chemical reticulation over approximately five hours, hardening without shrinkage into a compound with exceptional bonding strength and mechanical performance.
This is a product built for precision structural work: bonding fresh concrete to hardened concrete, anchoring carbon and glass-fibre reinforcement plates onto structural elements, repairing cracked or spalled concrete, and bonding natural stone, mortar, and brick where a mechanical fixing isn't practical or possible. In the Kenyan context — where structural strengthening of aging buildings, retrofitting for seismic or load compliance, and repair of water-damaged or corroded concrete elements are increasingly common on both commercial and residential projects — Adesilex PG2 fills a gap that ordinary construction adhesives, tile adhesives, or general-purpose epoxies simply cannot cover.
At KES 9,000 per 6kg kit, inclusive of VAT, Startcore Ventures Limited supplies genuine Mapei Adesilex PG2 as an authorized dealer, meaning every kit you receive is sourced through legitimate Mapei supply channels — critical for a product where structural performance depends entirely on the resin system performing exactly as engineered.
Why Authenticity Matters More With Structural Epoxy Than Almost Any Other Product
Kenya's construction chemicals market has a well-documented counterfeit and dilution problem, and structural epoxy adhesives are among the products most vulnerable to this — and most dangerous when it happens. Unlike a sealant or a decorative finish, a structural epoxy adhesive is often the single component holding a fibre-reinforcement plate onto a load-bearing beam, or bonding new concrete to old at a critical structural interface. If that bond fails, the consequences aren't cosmetic.
Here's what genuine Mapei Adesilex PG2 guarantees that a counterfeit or repackaged "generic epoxy" cannot:
- Verified mixing ratio and cure chemistry — Adesilex PG2's 3:1 mixing ratio (Component A to Component B) is precisely engineered; counterfeit products with mismatched or inconsistent resin-to-hardener chemistry can cure incompletely, remain tacky, or fail to develop full mechanical strength
- Consistent 5-hour cure without shrinkage — genuine formulations cure predictably; unverified epoxies can shrink during cure, introducing voids and stress points at the exact bond line where strength matters most
- EN 1504-4 compliance — Adesilex PG2 meets the European standard specifically governing structural bonding products for concrete repair, giving engineers a verifiable performance benchmark to specify against; counterfeit products carry no such traceable compliance
- Batch-traceable packaging — genuine kits arrive as sealed 4.5kg (Component A) and 1.5kg (Component B) drums with intact Mapei branding and batch codes, not repackaged or decanted containers of unknown origin or age
When you buy Adesilex PG2 from Startcore Ventures Limited, an authorized Mapei dealer, you're buying a product an engineer can specify by name in a submittal document with full confidence it will perform as documented — not a product you're hoping performs as advertised.
Key Applications
Mapei Adesilex PG2 is designed for structural and semi-structural bonding tasks across construction, repair, and reinforcement work:
- Structural reinforcement bonding — anchoring carbon-fibre and glass-fibre reinforcement plates and fabrics onto concrete beams, columns, and slabs for load-bearing capacity upgrades
- Concrete-to-concrete structural bonding — bonding new concrete pours to existing hardened concrete at construction joints where a monolithic structural connection is required
- Concrete crack and spall repair — structural bonding component in comprehensive concrete repair systems, used alongside repair mortars for full structural restoration
- Natural stone bonding — structural adhesion of natural stone elements in facades, cladding, and architectural features where mechanical fixings are impractical
- Brick and mortar structural bonding — reinforcing masonry structures in retrofit and strengthening projects
- Seismic retrofitting and structural strengthening — a core component in fibre-reinforced polymer (FRP) strengthening systems increasingly used in Kenya for upgrading older buildings to current structural standards
- Anchoring and doweling applications — bonding steel dowels, rebar, or connection elements into structural concrete where high pull-out strength is required
- Marine and infrastructure repair — structural bonding in bridges, retaining walls, and other infrastructure elements exposed to demanding environmental conditions
Key Features
- Two-component thixotropic epoxy system — mixes to a non-sag paste suitable for vertical and overhead application without formwork
- Long workability time — a 50-minute pot life at +23°C gives contractors realistic working time to apply the product correctly before it begins to set, reducing waste and rework
- High mechanical and bond strength — engineered specifically for structural applications, not general adhesion
- Cures without shrinkage — critical for maintaining full contact and strength at the bond line over the product's service life
- Applicable in thicknesses up to 1cm per layer — allows single-pass application for most structural bonding scenarios without multiple thin coats
- EN 1504-4 and EN 1504-9 compliant — meets recognized European standards for structural bonding and concrete repair systems, giving specifying engineers a verifiable performance reference
- Low minimum application thickness (1–2mm) — versatile enough for thin bond lines as well as thicker structural gaps
Technical Specifications
Property Detail
| Product Type | Two-component thixotropic epoxy adhesive
| Mixing Ratio (by weight) | Component A : Component B = 3 : 1
| Pot Life of Mix | Approx. 50 minutes at +23°C
| Minimum Applicable Thickness | 1–2 mm
| Maximum Applicable Thickness | 1 cm per layer
| Curing Time | Approx. 5 hours (chemical reticulation, without shrinkage)
| Application Method | Trowel
| Consumption | 1.65–1.75 kg/m² per mm of thickness applied
| Classification | EN 1504-4 (structural bonding), meets EN 1504-9 general principles
| Storage Life | 24 months from production, in original sealed packaging
| Packaging | 6kg kit — 4.5kg drum (Component A) + 1.5kg drum (Component B)
| Consistency | Thixotropic paste after mixing (non-sag, suitable for vertical/overhead use)
Important note: Adesilex PG2 is a professional-use structural product. Substrate preparation, correct mixing ratio, and application within the stated pot life are all critical to achieving the product's rated performance. For structural strengthening and reinforcement applications, work should be specified and supervised by a qualified structural engineer.
How to Apply Mapei Adesilex PG2 Correctly
Because this is a structural product, correct application technique is essential to achieving genuine structural performance — not just adhesion:
- Prepare the substrate thoroughly. Surfaces must be clean, sound, and free of dust, laitance, oil, grease, or any loose or friable material. For concrete, mechanical preparation (grinding or shot-blasting) is typically required to expose a sound, open-pore surface for the epoxy to key into.
- Check ambient and substrate temperature. Application performance is calibrated around +23°C; significantly higher or lower site temperatures will affect both pot life and cure time and may require adjustment to working method.
- Measure components accurately. Combine Component A and Component B in the specified 3:1 ratio by weight — do not estimate or eyeball this ratio, as an incorrect mix directly compromises cure chemistry and final strength.
- Mix thoroughly and mechanically. Use a low-speed mixer paddle to combine the two components until a uniform, streak-free consistency is achieved. Hand-mixing is not recommended for structural applications where full, even cure is required.
- Work within the pot life. With a 50-minute working window at +23°C, only mix the quantity you can apply and use within that time. In hotter site conditions typical of Kenya, working time may be reduced, so plan batch sizes accordingly.
- Apply with a trowel in a single layer up to 1cm thick, or in the case of thinner bond lines, down to the 1–2mm minimum thickness, ensuring full, even coverage across the bond area with no voids or air pockets.
- For fibre-reinforcement bonding, apply the adhesive to both the substrate and the reinforcement material, then position and press the reinforcement firmly into place, using a roller or firm pressure to eliminate trapped air and ensure full contact across the bonded area.
- Maintain the bond under load-free conditions for the full cure period — approximately 5 hours minimum before any handling, and longer before load-bearing service, depending on ambient conditions. Do not disturb or stress the bond during this period.
- Clean tools immediately after use, before the epoxy cures, as cured epoxy cannot be removed with solvents once set.
Frequently Asked Questions
What's the difference between Adesilex PG2 and a general-purpose construction adhesive? General-purpose adhesives are formulated for convenience and moderate bond strength across a wide range of light-duty tasks. Adesilex PG2 is a structural-grade epoxy engineered and tested to meet EN 1504-4 standards specifically for load-bearing and structural bonding applications, where failure is not an acceptable outcome. It is not intended as a substitute for general tile, wood, or light-fixture adhesives.
How long does Adesilex PG2 take to fully cure? Adesilex PG2 hardens by chemical reticulation in approximately 5 hours at +23°C without shrinkage. Full mechanical strength development for structural loading purposes should follow manufacturer guidance and, for critical structural applications, be confirmed by the supervising engineer before the bonded element is put into service.
Can Adesilex PG2 be applied on vertical or overhead surfaces? Yes. Its thixotropic consistency is specifically formulated to resist sagging or dripping once mixed, making it suitable for vertical walls and overhead structural elements such as beam soffits — common in reinforcement retrofitting work.
Is Adesilex PG2 suitable for bonding carbon-fibre reinforcement plates? Yes, this is one of its primary structural applications. It's widely used in fibre-reinforced polymer (FRP) strengthening systems to bond carbon and glass-fibre plates and fabrics onto concrete elements for load-capacity upgrades, seismic retrofitting, and structural strengthening.
How much Adesilex PG2 do I need for my project? Consumption is approximately 1.65 to 1.75 kg per square meter, per millimeter of thickness applied. For example, a 5mm bond line across 1m² would require roughly 8.25 to 8.75 kg of mixed product. Speak with our technical team with your specific bond area and thickness requirements for an accurate material estimate.
Does Adesilex PG2 require a primer before application? Substrate preparation requirements depend on the specific application and substrate condition. For most concrete structural bonding work, mechanical surface preparation (rather than a chemical primer) is the standard approach, but project-specific technical guidance should be followed, particularly for critical structural applications.
How is Adesilex PG2 different from Mapei's other epoxy adhesive variants (such as PG2 TG or PG2 SP)? Mapei produces several variants within the Adesilex PG range formulated for slightly different working conditions and applications — for example, temperature-specific formulations for hot climates. Adesilex PG2 is the standard structural bonding formulation; if your project has specific temperature or application constraints, our technical team can help confirm you're specifying the correct variant.
What is the price of Mapei Adesilex PG2 in Nairobi? Startcore Ventures Limited sells the genuine Mapei Adesilex PG2 6kg kit at KES 9,000, inclusive of VAT, with bulk and contractor pricing available for larger structural repair or reinforcement projects.
Can I use Adesilex PG2 for DIY home repairs, or is it strictly for professional/engineering use? While the chemistry itself can be applied by a competent user, Adesilex PG2 is formulated and marketed as a professional-use structural product. Its applications — reinforcement bonding, structural repair, seismic retrofitting — are typically specified by structural engineers and executed by trained contractors, given the consequences of an improperly executed structural bond.
Where can I buy genuine Mapei Adesilex PG2 in Kenya? Startcore Ventures Limited, based at Bhavesh Centre, Ngara Road, Nairobi, is an authorized Mapei dealer stocking Adesilex PG2 and the full Mapei structural repair and bonding range, with countrywide delivery available.
Complete Your Structural Repair or Reinforcement System
Adesilex PG2 is rarely used in isolation on a structural project. For a complete, correctly specified system, pair it with these complementary Mapei products, also available at Startcore Ventures:
- Mapei Mapegrout T60 — R4-class structural repair mortar, used to rebuild spalled or damaged concrete sections before or alongside epoxy bonding work
- Mapei Lamposilex ME — for stopping any active water ingress at the repair site before structural bonding work begins, since a dry, sound substrate is essential for epoxy bond performance
A Note for Specifying Engineers and Contractors
Structural bonding work, by its nature, tends to be specified against a technical standard rather than chosen off a shelf. If you're procuring Adesilex PG2 for a project requiring submittal documentation, our team at Startcore Ventures can provide the current Mapei technical data sheet and safety data sheet for your records, and can confirm current batch and stock availability ahead of your project timeline — particularly useful for larger reinforcement or retrofitting projects where material lead time needs to be planned against a construction schedule.
Why Buy From Startcore Ventures Limited
Startcore Ventures Limited is an authorized dealer for Mapei's full construction chemicals range — including structural repair mortars, waterproofing systems, tile adhesives, and structural bonding epoxies like Adesilex PG2 — alongside other trusted global brands including Sika, Akfix, Somafix, and Fischer. We serve structural engineers, contractors, fabricators, and maintenance teams across Nairobi and the wider Kenyan market.
For a product category where the consequences of a counterfeit or substandard product are structural, not cosmetic, buying genuine, authentic Mapei stock through an authorized channel isn't a preference — it's a requirement. Every kit of Adesilex PG2 sold by Startcore Ventures is sourced through legitimate Mapei supply channels, giving engineers, contractors, and project owners full confidence in the material behind their structural work.
Order genuine Mapei Adesilex PG2 today at KES 9,000 inc. VAT — visit us at Bhavesh Centre, Ngara Road, Nairobi, or contact us for bulk, contractor, and project-specific pricing.
- Phone/WhatsApp: +254 705 544 817
- Email: info@startcore.co.ke
- Website: startcore.co.ke
Mapei Adesilex PG2 – Two-Component Epoxy Adhesive for Structural Bonding | Nairobi, Kenya
Price: KES 9,000 (Inclusive of VAT) Brand: Mapei (Italy) | Authorized Startcore Ventures Distribution Category: Construction Chemicals / Structural Adhesives & Epoxy Bonding Pack Size: 6kg Kit (4.5kg Component A + 1.5kg Component B) | Availability: In Stock
Product Overview
If you're searching for a genuine, high-strength structural epoxy adhesive in Kenya, Mapei Adesilex PG2 is the product engineers, structural repair contractors, and reinforcement specialists specify when a bond simply cannot be allowed to fail. This is not a general-purpose construction adhesive — it's a two-component, thixotropic epoxy system engineered in Mapei's own research laboratories specifically for structural bonding applications where mechanical strength, durability, and long-term reliability are non-negotiable.
Adesilex PG2 is formulated from selected epoxy resins combined with fine-grain aggregates and specialized additives. When Component A (resin) is mixed with Component B (hardener) in the correct ratio, the result is a smooth, thixotropic paste — meaning it stays exactly where you put it, even on vertical or overhead surfaces, without slumping or dripping, and without the need for formwork or shuttering. Once applied, it cures through chemical reticulation over approximately five hours, hardening without shrinkage into a compound with exceptional bonding strength and mechanical performance.
This is a product built for precision structural work: bonding fresh concrete to hardened concrete, anchoring carbon and glass-fibre reinforcement plates onto structural elements, repairing cracked or spalled concrete, and bonding natural stone, mortar, and brick where a mechanical fixing isn't practical or possible. In the Kenyan context — where structural strengthening of aging buildings, retrofitting for seismic or load compliance, and repair of water-damaged or corroded concrete elements are increasingly common on both commercial and residential projects — Adesilex PG2 fills a gap that ordinary construction adhesives, tile adhesives, or general-purpose epoxies simply cannot cover.
At KES 9,000 per 6kg kit, inclusive of VAT, Startcore Ventures Limited supplies genuine Mapei Adesilex PG2 as an authorized dealer, meaning every kit you receive is sourced through legitimate Mapei supply channels — critical for a product where structural performance depends entirely on the resin system performing exactly as engineered.
Why Authenticity Matters More With Structural Epoxy Than Almost Any Other Product
Kenya's construction chemicals market has a well-documented counterfeit and dilution problem, and structural epoxy adhesives are among the products most vulnerable to this — and most dangerous when it happens. Unlike a sealant or a decorative finish, a structural epoxy adhesive is often the single component holding a fibre-reinforcement plate onto a load-bearing beam, or bonding new concrete to old at a critical structural interface. If that bond fails, the consequences aren't cosmetic.
Here's what genuine Mapei Adesilex PG2 guarantees that a counterfeit or repackaged "generic epoxy" cannot:
- Verified mixing ratio and cure chemistry — Adesilex PG2's 3:1 mixing ratio (Component A to Component B) is precisely engineered; counterfeit products with mismatched or inconsistent resin-to-hardener chemistry can cure incompletely, remain tacky, or fail to develop full mechanical strength
- Consistent 5-hour cure without shrinkage — genuine formulations cure predictably; unverified epoxies can shrink during cure, introducing voids and stress points at the exact bond line where strength matters most
- EN 1504-4 compliance — Adesilex PG2 meets the European standard specifically governing structural bonding products for concrete repair, giving engineers a verifiable performance benchmark to specify against; counterfeit products carry no such traceable compliance
- Batch-traceable packaging — genuine kits arrive as sealed 4.5kg (Component A) and 1.5kg (Component B) drums with intact Mapei branding and batch codes, not repackaged or decanted containers of unknown origin or age
When you buy Adesilex PG2 from Startcore Ventures Limited, an authorized Mapei dealer, you're buying a product an engineer can specify by name in a submittal document with full confidence it will perform as documented — not a product you're hoping performs as advertised.
Key Applications
Mapei Adesilex PG2 is designed for structural and semi-structural bonding tasks across construction, repair, and reinforcement work:
- Structural reinforcement bonding — anchoring carbon-fibre and glass-fibre reinforcement plates and fabrics onto concrete beams, columns, and slabs for load-bearing capacity upgrades
- Concrete-to-concrete structural bonding — bonding new concrete pours to existing hardened concrete at construction joints where a monolithic structural connection is required
- Concrete crack and spall repair — structural bonding component in comprehensive concrete repair systems, used alongside repair mortars for full structural restoration
- Natural stone bonding — structural adhesion of natural stone elements in facades, cladding, and architectural features where mechanical fixings are impractical
- Brick and mortar structural bonding — reinforcing masonry structures in retrofit and strengthening projects
- Seismic retrofitting and structural strengthening — a core component in fibre-reinforced polymer (FRP) strengthening systems increasingly used in Kenya for upgrading older buildings to current structural standards
- Anchoring and doweling applications — bonding steel dowels, rebar, or connection elements into structural concrete where high pull-out strength is required
- Marine and infrastructure repair — structural bonding in bridges, retaining walls, and other infrastructure elements exposed to demanding environmental conditions
Key Features
- Two-component thixotropic epoxy system — mixes to a non-sag paste suitable for vertical and overhead application without formwork
- Long workability time — a 50-minute pot life at +23°C gives contractors realistic working time to apply the product correctly before it begins to set, reducing waste and rework
- High mechanical and bond strength — engineered specifically for structural applications, not general adhesion
- Cures without shrinkage — critical for maintaining full contact and strength at the bond line over the product's service life
- Applicable in thicknesses up to 1cm per layer — allows single-pass application for most structural bonding scenarios without multiple thin coats
- EN 1504-4 and EN 1504-9 compliant — meets recognized European standards for structural bonding and concrete repair systems, giving specifying engineers a verifiable performance reference
- Low minimum application thickness (1–2mm) — versatile enough for thin bond lines as well as thicker structural gaps
Technical Specifications
Property Detail
| Product Type | Two-component thixotropic epoxy adhesive
| Mixing Ratio (by weight) | Component A : Component B = 3 : 1
| Pot Life of Mix | Approx. 50 minutes at +23°C
| Minimum Applicable Thickness | 1–2 mm
| Maximum Applicable Thickness | 1 cm per layer
| Curing Time | Approx. 5 hours (chemical reticulation, without shrinkage)
| Application Method | Trowel
| Consumption | 1.65–1.75 kg/m² per mm of thickness applied
| Classification | EN 1504-4 (structural bonding), meets EN 1504-9 general principles
| Storage Life | 24 months from production, in original sealed packaging
| Packaging | 6kg kit — 4.5kg drum (Component A) + 1.5kg drum (Component B)
| Consistency | Thixotropic paste after mixing (non-sag, suitable for vertical/overhead use)
Important note: Adesilex PG2 is a professional-use structural product. Substrate preparation, correct mixing ratio, and application within the stated pot life are all critical to achieving the product's rated performance. For structural strengthening and reinforcement applications, work should be specified and supervised by a qualified structural engineer.
How to Apply Mapei Adesilex PG2 Correctly
Because this is a structural product, correct application technique is essential to achieving genuine structural performance — not just adhesion:
- Prepare the substrate thoroughly. Surfaces must be clean, sound, and free of dust, laitance, oil, grease, or any loose or friable material. For concrete, mechanical preparation (grinding or shot-blasting) is typically required to expose a sound, open-pore surface for the epoxy to key into.
- Check ambient and substrate temperature. Application performance is calibrated around +23°C; significantly higher or lower site temperatures will affect both pot life and cure time and may require adjustment to working method.
- Measure components accurately. Combine Component A and Component B in the specified 3:1 ratio by weight — do not estimate or eyeball this ratio, as an incorrect mix directly compromises cure chemistry and final strength.
- Mix thoroughly and mechanically. Use a low-speed mixer paddle to combine the two components until a uniform, streak-free consistency is achieved. Hand-mixing is not recommended for structural applications where full, even cure is required.
- Work within the pot life. With a 50-minute working window at +23°C, only mix the quantity you can apply and use within that time. In hotter site conditions typical of Kenya, working time may be reduced, so plan batch sizes accordingly.
- Apply with a trowel in a single layer up to 1cm thick, or in the case of thinner bond lines, down to the 1–2mm minimum thickness, ensuring full, even coverage across the bond area with no voids or air pockets.
- For fibre-reinforcement bonding, apply the adhesive to both the substrate and the reinforcement material, then position and press the reinforcement firmly into place, using a roller or firm pressure to eliminate trapped air and ensure full contact across the bonded area.
- Maintain the bond under load-free conditions for the full cure period — approximately 5 hours minimum before any handling, and longer before load-bearing service, depending on ambient conditions. Do not disturb or stress the bond during this period.
- Clean tools immediately after use, before the epoxy cures, as cured epoxy cannot be removed with solvents once set.
Frequently Asked Questions
What's the difference between Adesilex PG2 and a general-purpose construction adhesive? General-purpose adhesives are formulated for convenience and moderate bond strength across a wide range of light-duty tasks. Adesilex PG2 is a structural-grade epoxy engineered and tested to meet EN 1504-4 standards specifically for load-bearing and structural bonding applications, where failure is not an acceptable outcome. It is not intended as a substitute for general tile, wood, or light-fixture adhesives.
How long does Adesilex PG2 take to fully cure? Adesilex PG2 hardens by chemical reticulation in approximately 5 hours at +23°C without shrinkage. Full mechanical strength development for structural loading purposes should follow manufacturer guidance and, for critical structural applications, be confirmed by the supervising engineer before the bonded element is put into service.
Can Adesilex PG2 be applied on vertical or overhead surfaces? Yes. Its thixotropic consistency is specifically formulated to resist sagging or dripping once mixed, making it suitable for vertical walls and overhead structural elements such as beam soffits — common in reinforcement retrofitting work.
Is Adesilex PG2 suitable for bonding carbon-fibre reinforcement plates? Yes, this is one of its primary structural applications. It's widely used in fibre-reinforced polymer (FRP) strengthening systems to bond carbon and glass-fibre plates and fabrics onto concrete elements for load-capacity upgrades, seismic retrofitting, and structural strengthening.
How much Adesilex PG2 do I need for my project? Consumption is approximately 1.65 to 1.75 kg per square meter, per millimeter of thickness applied. For example, a 5mm bond line across 1m² would require roughly 8.25 to 8.75 kg of mixed product. Speak with our technical team with your specific bond area and thickness requirements for an accurate material estimate.
Does Adesilex PG2 require a primer before application? Substrate preparation requirements depend on the specific application and substrate condition. For most concrete structural bonding work, mechanical surface preparation (rather than a chemical primer) is the standard approach, but project-specific technical guidance should be followed, particularly for critical structural applications.
How is Adesilex PG2 different from Mapei's other epoxy adhesive variants (such as PG2 TG or PG2 SP)? Mapei produces several variants within the Adesilex PG range formulated for slightly different working conditions and applications — for example, temperature-specific formulations for hot climates. Adesilex PG2 is the standard structural bonding formulation; if your project has specific temperature or application constraints, our technical team can help confirm you're specifying the correct variant.
What is the price of Mapei Adesilex PG2 in Nairobi? Startcore Ventures Limited sells the genuine Mapei Adesilex PG2 6kg kit at KES 9,000, inclusive of VAT, with bulk and contractor pricing available for larger structural repair or reinforcement projects.
Can I use Adesilex PG2 for DIY home repairs, or is it strictly for professional/engineering use? While the chemistry itself can be applied by a competent user, Adesilex PG2 is formulated and marketed as a professional-use structural product. Its applications — reinforcement bonding, structural repair, seismic retrofitting — are typically specified by structural engineers and executed by trained contractors, given the consequences of an improperly executed structural bond.
Where can I buy genuine Mapei Adesilex PG2 in Kenya? Startcore Ventures Limited, based at Bhavesh Centre, Ngara Road, Nairobi, is an authorized Mapei dealer stocking Adesilex PG2 and the full Mapei structural repair and bonding range, with countrywide delivery available.
Complete Your Structural Repair or Reinforcement System
Adesilex PG2 is rarely used in isolation on a structural project. For a complete, correctly specified system, pair it with these complementary Mapei products, also available at Startcore Ventures:
- Mapei Mapegrout T60 — R4-class structural repair mortar, used to rebuild spalled or damaged concrete sections before or alongside epoxy bonding work
- Mapei Lamposilex ME — for stopping any active water ingress at the repair site before structural bonding work begins, since a dry, sound substrate is essential for epoxy bond performance
A Note for Specifying Engineers and Contractors
Structural bonding work, by its nature, tends to be specified against a technical standard rather than chosen off a shelf. If you're procuring Adesilex PG2 for a project requiring submittal documentation, our team at Startcore Ventures can provide the current Mapei technical data sheet and safety data sheet for your records, and can confirm current batch and stock availability ahead of your project timeline — particularly useful for larger reinforcement or retrofitting projects where material lead time needs to be planned against a construction schedule.
Why Buy From Startcore Ventures Limited
Startcore Ventures Limited is an authorized dealer for Mapei's full construction chemicals range — including structural repair mortars, waterproofing systems, tile adhesives, and structural bonding epoxies like Adesilex PG2 — alongside other trusted global brands including Sika, Akfix, Somafix, and Fischer. We serve structural engineers, contractors, fabricators, and maintenance teams across Nairobi and the wider Kenyan market.
For a product category where the consequences of a counterfeit or substandard product are structural, not cosmetic, buying genuine, authentic Mapei stock through an authorized channel isn't a preference — it's a requirement. Every kit of Adesilex PG2 sold by Startcore Ventures is sourced through legitimate Mapei supply channels, giving engineers, contractors, and project owners full confidence in the material behind their structural work.
Order genuine Mapei Adesilex PG2 today at KES 9,000 inc. VAT — visit us at Bhavesh Centre, Ngara Road, Nairobi, or contact us for bulk, contractor, and project-specific pricing.
- Phone/WhatsApp: +254 705 544 817
- Email: info@startcore.co.ke
- Website: startcore.co.ke
Similar Products
Instant Water Plug
